[Rovernet] 3500S front brake bleed valve

[Fletcher Millmore]

I suggest you heat the nipple red hot with an acetylene torch, let it 
cool and unscrew it with pliers. Or, you can put a larger nut over the 
nipple and electric weld it to the nipple, again letting it cool before 
unscrewing. I have removed many like this, without a failure.

FRM

On 11/20/2013 7:28 PM, Vern Klukas wrote:
> The thread is 3/8 fine. Cone end (I guess you’d call that taper).
>
> Yours
> Vern
>
> On Nov 20, 2013, at 3:23 PM, GeffMcCarthy <geffandjulie at comcast.net> wrote:
>
>> I have rounded the 3/8 front bleed nipple, and cannot free it.  My mechanic,
>> Neville, needs to know if it is a taper, or a ball valve.  The calipers,
>> AFAIK, are original, and I think, rebuilt by White Post.
>>
>> Help please!
>>
>>
>>
>> AvMedSafe
>>
>> Geoffrey W. McCarthy MD MBA DipAvMed
>>
>> 677 NW Melinda Ave Portland OR USA 97210
>>
>> 503-241-8468(h) 503-799-3809 (mobile)
>>
>>
>>
>> -------------- next part --------------
>> An HTML attachment was scrubbed...
>> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20131120/a9b40e19/attachment.html>
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at rovernet.org
>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> Inkspot Type & Design	250 864 5619	in at inkspotco.com
>
>
>
>
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>