[Rovernet] P3

[Barry Lafbery]

Hi Ben,
            OK, I thought $30 each.
I will look into the shipping and packing and let you know, will take a 
few days.

Barry



On 13-09-09 05:15 AM, Ben Saunders wrote:
> Hi Barry,
> Can you please let me know what you want for two of them, preferably with
> different part numbers, and what the shipping cost (via UPS) will be. I will
> put the one with the most curve on the driver's side which should do the
> job. If you have any of the bolts I could sure use a few of them as well.
> Mine can be used but the threads have been flattened a bit on some of them.
> Regards,
> Ben
>
> -----Original Message-----
> From: Rovernet [mailto:rovernet-bounces at rovernet.org] On Behalf Of Barry
> Lafbery
> Sent: Sunday, September 08, 2013 9:46 PM
> To: Rovernet
> Subject: Re: [Rovernet] P3
>
> The 3 springs that I have all have a part number stamped on them referring
> to left and right also at one end has front stamped on it. I think Scott is
> right about the age of the cars that the springs have all settled and it
> doesn't  really matter what side they go on so long as you have the front to
> the front. But as the book says , drivers side and passenger side so who
> knows what they are talking about when we had L/H/D and R/H/D.
>
> Barry
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.3392 / Virus Database: 3222/6648 - Release Date: 09/08/13
>
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>