[Rovernet] NADA 3500S Servo

[Ben Saunders]

Hi Kent and happy New Year,
I am not in a real hurry but I am trying to sort out the problem with the
braking system in the 3500S NADA. I want to try to see how it will work with
two of the 3500S booster cans (one in each corner) dressed with the 2000 TC
cylinders. I plan to use a Land Rover CV master at the pedal to get enough
volume to push the two cylinders at the boosters. All the reading I have
done and the 3500S cars I have driven tells me that the problem is a design
one and needs to be rectified. The 2000 TC had a far better system so I plan
to duplicate that. It will require moving the washer bottle and the AC
drier/electrical components as well but that I was going to do anyway. I
hope to use either the SD1 or Range Rover steering pump and AC compressor
which will call for a bit of re-arranging up front on the engine but it will
be for the better. Do let me know what you have and let me know about the
right rear door card as well.
Thanks,
Ben 

-----Original Message-----
From: Rovernet [mailto:rovernet-bounces at rovernet.org] On Behalf Of Kent
Kinard
Sent: Thursday, January 09, 2014 10:30 AM
To: Rovernet
Subject: Re: [Rovernet] NADA 3500S Servo

Hi Ben,
I have some. How fast do you need one as I may have to pull one from a car.
Kent K.

Ben Saunders wrote:
> Hello Rovernetters,
> I am looking for a 1970 Rover 3500S NADA vacuum servo. All I need is 
> the can and not the cylinder.
> Thanks,
> Ben
>
> Ben & Cathy Saunders
> P O Box 846
> Columbia, Va. 23038
> (434) 842-3667
>
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>


_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2014.0.4259 / Virus Database: 3658/6989 - Release Date: 01/09/14