[Rovernet] Brakes locked 3500S only when car is on - Booster?

Steven Dibdin sdibdin at gmail.com
Wed Jul 23 13:25:59 EDT 2014


Rob, I would check that the actuator for the diaphragm in the white plastic cap is moving freely. If it's stuck in the up position it'll give you just the problems you described. 

Hope that helps,

Steven 

Sent from a small screen, please excuse any typing errors. 

> On Jul 23, 2014, at 11:37, Rob Sayre via Rovernet <rovernet at rovernet.org> wrote:
> 
> Good morning:
> 
> When I start my 1970 3500s the brakes lock and the pedal is hard as if applied.
> 
> If the vacuum line from the intake to the booster is disconnected everything frees up.  All lines from the intake and between the booster and the master cylinder with the white plastic valve assembly are intact with no leaks.  The little valve under the cap with the spring is not leaking any air and is pulled closed by vacuum.
> 
> I took the white plastic assembly apart and the diaphragm  has no visible defect.
> 
> The car sat for several years.
> 
> Any help on how to pinpoint and fix the problem would be appreciated.
> 
> Thanks,
> 
> rob
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20140723/e629dac1/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org




More information about the Rovernet mailing list