[Rovernet] P5 back in action

[peter king]

the P5 rolls again! Problem turned out to be a bad new EI module. I replace the unit (again) and got it started, albeit roughly. Rebuilt the card today and it’s back to being my favorite car to drive. 

Thanks for your suggestions.

Peter


> On Apr 5, 2015, at 4:36 PM, Rover Man via Rovernet <rovernet at rovernet.org> wrote:
> 
> To Peter King:try turning the engine over every slight degree by hand if you could and check the distributor at the shaft at the rotor arm back and forth to check for play, you will notice if the gears are worn out.  Also check if the drift on the distributor , had the locking pin in place and not worn out or broken.Was the oil pressure okay while last driving it?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20150405/920c9ecb/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

Peter King
Peter King + Company
21 Drydock Avenue
Floor 7
Boston, MA 02210
617-292-7877
www.king-co.com