[Rovernet] p5 slow turning driveshaft

peter king peter at king-co.com
Sun Apr 5 21:51:02 EDT 2015

Hi Nelson,

Locking pin is fine, but I’ll check for movement with the hand crank—good idea.



> On Apr 5, 2015, at 4:36 PM, Rover Man via Rovernet <rovernet at rovernet.org> wrote:
> To Peter King:try turning the engine over every slight degree by hand if you could and check the distributor at the shaft at the rotor arm back and forth to check for play, you will notice if the gears are worn out.  Also check if the drift on the distributor , had the locking pin in place and not worn out or broken.Was the oil pressure okay while last driving it?
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20150405/920c9ecb/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

Peter King
Peter King + Company
21 Drydock Avenue
Floor 7
Boston, MA 02210

More information about the Rovernet mailing list