[Rovernet] P6 3500 brakes stuck on
Steven Dibdin
sdibdin at gmail.com
Fri Oct 23 19:54:53 EDT 2015
Sounds like you need to adjust the pushrod length on the brake pedal. Shorten it slightly and see if it still happens.
Best of luck,
Steven
Sent from a small screen, please excuse any typing errors.
> On Oct 23, 2015, at 18:57, GeffMcCarthy via Rovernet <rovernet at rovernet.org> wrote:
>
> Neville and I have rebuilt every component of the system, and the brakes
> still stick on and don't release. Is the problem in the vacuum control
> valve on the master cylinder? (This is a 1970, dual system, with the slave
> servo on the right side, and the splitter just above the slave.) Thanks for
> advice.
>
>
>
> AvMedSafe
>
> Geoffrey W. McCarthy MD MBA DipAvMed
>
> 677 NW Melinda Ave Portland OR USA 97210
>
> 503-241-8468(h) 503-799-3809 (mobile)
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20151023/4a5935fc/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
More information about the Rovernet
mailing list