[Rovernet] 3.5 to 3.9?
Dermot Harvey
roverman2 at verizon.net
Mon Mar 7 17:35:42 EST 2016
Yes, you’re right about the breathing. Sure, a twin plenum would be nice - where did you see it?
If you want to run without cats you could use the English exhaust system, or at least the downpipes which give you some extraction. I used a plenum from an early fuel injected Range Rover - I got it used in England I think at the SD1 club spares day.
I still have a lot of new SD1 parts plus 2 parts cars.
Dermot Harvey
Spectral Kinetics
> On Mar 7, 2016, at 3:41 PM, GeffMcCarthy via Rovernet <rovernet at rovernet.org> wrote:
>
> Thanks, Dermot. I also have read that the SD1 breathing is restricted
> severely. A Vitesse twin plenum was advertised a few months back, and sold
> for £800! I plan to investigate throttle body injection on an Edelbrock
> manifold, or similar.
>
>
>
> AvMedSafe
>
> Geoffrey W. McCarthy MD MBA DipAvMed
>
> 677 NW Melinda Ave Portland OR USA 97210
>
> 503-241-8468(h) 503-799-3809 (mobile)
>
>
>
> -----Original Message-----
> From: Rovernet [mailto:rovernet-bounces at rovernet.org] On Behalf Of Dermot
> Harvey via Rovernet
> Sent: Monday, March 07, 2016 10:59 AM
> To: Rovernet <rovernet at rovernet.org>
> Cc: Dermot Harvey <roverman2 at verizon.net>
> Subject: Re: [Rovernet] 3.5 to 3.9?
>
>
>
> Hi Geoffrey,
>
>
>
> I think you would be better off with one of the larger iterations of the
> Rover V8. such as the 3.9 or 4.2 Liter. I have both engines used in stock
> if you are interested.
>
> Alternately, you could have your present motor upgraded in power by using
> higher compression pistons, a more radical camshaft and improvements to your
> Fuel Injection mapping. This is what I did with my SD1 when I rebuilt the
> motor some years ago. The car is now no slouch and is an excellent Grand
> Touring car for fast longer journeys. Still prefer my 1971 2000TC for
> running around the County.
>
>
>
> Best,
>
>
>
> Dermot Harvey
>
> Spectral Kinetics
>
>
>
>
>
>
>
>> On Feb 29, 2016, at 6:46 PM, Brian Thornhill via Rovernet <
> <mailto:rovernet at rovernet.org> rovernet at rovernet.org> wrote:
>
>>
>
>> Being a Land Rover tech for 17 years and working with these motors for
> many years I am not a fan of boring them as you tend to break the seal loose
> between the sleeve and the block I have sourced a few good 3.9 and 4.6
> blocks for guys with TR8's they work well if you ant to stay with that block
> contact The Wedge Shop they can help you.
>
>>
>
>> Please excuse errors and format this email sent from iPhone
>
>>
>
>>
>
>>> On Feb 29, 2016, at 3:21 PM, GeffMcCarthy via Rovernet <
> <mailto:rovernet at rovernet.org> rovernet at rovernet.org> wrote:
>
>>>
>
>>> I am still looking for more thrust for my 1970 3500S and 1980SD1. Is
>
>>> it feasible, and reasonably priced, to bore the 3.5 to the 3.9? I
>
>>> understand the crankshaft remains the same.
>
>>>
>
>>>
>
>>>
>
>>> AvMedSafe
>
>>>
>
>>> Geoffrey W. McCarthy MD MBA DipAvMed
>
>>>
>
>>> 677 NW Melinda Ave Portland OR USA 97210
>
>>>
>
>>> 503-241-8468(h) 503-799-3809 (mobile)
>
>>>
>
>>>
>
>>>
>
>>> -------------- next part -------------- An HTML attachment was
>
>>> scrubbed...
>
>>> URL:
>
>>> <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/2016
>
>>> 0229/8be6d02b/attachment.html>
>
>>> _______________________________________________
>
>>> Rovernet mailing list
>
>>> <mailto:Rovernet at rovernet.org> Rovernet at rovernet.org
>
>>> <http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
>>
>
>> _______________________________________________
>
>> Rovernet mailing list
>
>> <mailto:Rovernet at rovernet.org> Rovernet at rovernet.org
>
>> <http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
>
>
> -------------- next part --------------
>
> An HTML attachment was scrubbed...
>
> URL: <
> <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20160307/c4
> d1618c/attachment.html>
> http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20160307/c4d
> 1618c/attachment.html>
>
> _______________________________________________
>
> Rovernet mailing list
>
> <mailto:Rovernet at rovernet.org> Rovernet at rovernet.org
>
> <http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20160307/d7d6983f/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20160307/4fd0fbd8/attachment.html>
More information about the Rovernet
mailing list