[Rovernet] P6 wheels / tires
Gord Reddy
gordreddy at telus.net
Tue Feb 6 20:07:30 EST 2018
Just put a set of Spax adjustables on my P6.
Gord
-----Original Message-----
From: Barry Paulson via Rovernet
Sent: Tuesday, February 6, 2018 2:28 PM
To: Scruggs Family
Cc: Barry Paulson ; Rovernet
Subject: Re: [Rovernet] P6 wheels / tires
Thank you for the detailed and informative response. Much appreciated!
Barry (1973 P6 2200TC)
Ottawa
Canada
Sent from my iPad
> On Feb 6, 2018, at 17:51, Scruggs Family <gjkzscruggs at verizon.net> wrote:
>
> After 47 years of P6 ownership my favorite tire size is 195/60-14 and have
> used that size with several brands. My original '67 TC came with the
> Magstar alloy/steel wheels which have been straight and reliable but are
> not aesthetically to my taste. I very much like the look of the Rostyle
> wheels but they are very soft and can be bent from the stress of a typical
> tire mounting machine... yes, I have several bent that way. I have a set
> of refurbished 14" SD1 wheels with new Yokohama AVS Intermediates, in
> 195/60, on them waiting for one of the P6s to reclaim the road.
>
> I would use 15" Panasport/Minilite wheels if I could find some. On a trip
> to London years ago I visited the Rover parts shop on Leabridge Road where
> the conversation got around to wheels. I was told that when the Metro
> Police used 3500s they went to Minilite wheels but as those cars went out
> of service the wheels disappeared into the hands of racers and were used
> on track cars. I seem to recall seeing John Wolf Racing wheels in 15" for
> P6 but only one time.
>
> One good reason to go to 15" wheels is the reality that tire manufacturers
> are slowly abandoning the smaller sizes and good rubber in 14" is getting
> very hard to find.
>
> The only suspension spec that is easily adjustable is toe. Although the
> factory spec is, as I recall, 1/16 in, + or - 1/16, I've found that 1/8 in
> does not wear the inner edges of the tires and drives wonderfully.
>
> Anyone recall the name of those expensive, adjustable front shocks for the
> P6?
>
> Gross
>
>
> -----Original Message-----
> From: Rovernet [mailto:rovernet-bounces at rovernet.org] On Behalf Of Barry
> Paulson via Rovernet
> Sent: Monday, February 5, 2018 10:03 PM
> To: rovernet at rovernet.org
> Cc: Barry Paulson
> Subject: [Rovernet] P6 wheels / tires
>
> Looking for wheel / tire suggestions for my 73 P6 2200TC. Now has 14”
> steel rims and full covers, shod in original size (hard to find)
> Michelins.
>
> I wish to ehnance appearance and road-going performance, and have access
> to 4 Rover alloys to be refinished. These are currently painted all black
> / without chrome polished spoke highlights.
>
> Is it wise to go to 15s?
>
> What ratio / profile / brand do you recommend?
>
> Other considerations relative to suspension geometry?
>
> Regards,
>
> Barry
> Ottawa
>
>
> Sent from my iPad
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
More information about the Rovernet
mailing list