[Rovernet] Starter trouble

[Tom Rymes]

Geff,

A pre-engaged starter like that should have the solenoid push the gear out
to mesh with the flywheel, then engage the motor to spin. It sounds like
maybe it's only doing the latter.

Or at least I think that's the case. Hopefully someone who knows more will
confirm.

Tom

On Tue, Jul 24, 2018, 11:35 PM Geff McCarthy via Rovernet <
rovernet at rovernet.org> wrote:

> Umm...since we are analyzing starters: My 70 3500S began to be reluctant
> to start; it would click 3-4 times then finally engage and start. Someone
> suggested the solenoid was bad. New solenoid in, and now I hear only a
> spinning noise, no click, no engagement.  Help!!!
>
> Geoffrey W. McCarthy MD MBA DipAvMed
> 677 NW Melinda Ave
> Portland OR 97210
> 503-241-8468 (h)
> 503-799-3809 (m)
>
> -----Original Message-----
> From: Rovernet <rovernet-bounces at rovernet.org> On Behalf Of Steven Dibdin
> via Rovernet
> Sent: Tuesday, July 24, 2018 6:12 PM
> To: Rovernet <rovernet at rovernet.org>
> Cc: Steven Dibdin <sdibdin at gmail.com>
> Subject: Re: [Rovernet] Starter trouble
>
> Looking at the marks on the pinion (right way round btw, not sure if it’s
> even possible to reverse it) it looks like it’s not even fully engaging
> with the ring gear.
>
> I rebuilt my starter last year. It was still slow afterwards. It was only
> then I realized the battery terminal clamp was getting hot. The part that
> clamps down onto the cable was tight, but the strands of copper on the
> cable were heavily corroded under the insulation. I cleaned them, applied
> Vaseline and reassembled. All good after that. Jut a thought.
>
> Sent from a small screen, please excuse any typos.
>
> > On Jul 24, 2018, at 21:06, Tom Rymes via Rovernet <rovernet at rovernet.org>
> wrote:
> >
> > And another video: https://youtu.be/ol8ZKmo82oY
> >
> > The starter slows noticeably when spinning. I guess it's going back to
> > the rebuilder, unless someone tells me this is normal.
> >
> >
> >
> >> On Tue, Jul 24, 2018, 8:45 PM Tom Rymes <tom at rymes.net> wrote:
> >>
> >> So, I took the starter out of the car tonight, and remembered why I
> >> never
> >>> wanted to do that again. The Bendix looks to be in good shape with
> >>> no broken parts and freely moving and well-lubricated.
> >>
> >>
> >>> Is it possible that this could just be a weak battery that just
> >>> doesn't have enough power to throw the starter gear to a fully engaged
> position?
> >>
> >>
> >> Video: https://youtu.be/N3psw31a8TI
> >>
> > -------------- next part -------------- An HTML attachment was
> > scrubbed...
> > URL:
> > <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20180
> > 724/b192eaaa/attachment.html>
> > _______________________________________________
> > Rovernet mailing list
> > Rovernet at rovernet.org
> > http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20180724/02ff0216/attachment.html>