[Rovernet] stop valve and spring needed for 3500S servo

[pierre janusz]

I think you will find he is in need of the piston inside the cylinder together with its spring. I can't see how the servo could have functioned at all satisfactorily without these parts being there before Jim decided to dismantle it.
Pierre

-----Original Message-----
From: Vern Inkspot via Rovernet <rovernet at rovernet.org>
To: Rovernet <rovernet at rovernet.org>
CC: Vern Inkspot <vern at inkspotco.com>
Sent: Thu, 1 Aug 2019 15:40
Subject: Re: [Rovernet] stop valve and spring needed for 3500S servo

Hi Jim

I’m not sure what bit you mean, are you talking by chance about the air valve cap & the little spring under there? If so, the easiest thing would be to buy a air valve kit, which will have an entire new cover. Fairly cheap, 20 or 30$ I think.

But first, let’s narrow down what you’re looking for.

Yours
Vern

> On Jul 31, 2019, at 6:14 PM, Jim Pile via Rovernet <rovernet at rovernet.org> wrote:
> 
> Hello, my friends,  Rebuilding the servo and I can't go any further without the stop valve/spring that somehow went missing when the previous owner did an overhaul.Perhaps someone has an extra servo lying around that would not miss the valve. I do have an extra servo kit for the 3500 to barter with, or - of course - $$. If none is available, could this little piece be cross-referenced to a similar servo? Probably not likely. That little piece is the only thing keeping the car off the road!
> I look forward to your thoughts and suggestions.
>            Jim Pile
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190801/0a278b6a/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org


inkspotco.com · 250 864 5619 · in at inkspotco.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190801/24ecf9ee/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: E-mail Signature logo.png
Type: image/png
Size: 22660 bytes
Desc: not available
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190801/24ecf9ee/attachment.png>
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190801/e11903fe/attachment.html>