[Rovernet] Master Cylinder for 1970 3500P6b

[Comcast]

Send it to San Jose Power Brake fir rebuilding!

Sent from my iPhone

> On 11 Jan 2019, at 19:11, Steve Manwell via Rovernet <rovernet at rovernet.org> wrote:
> 
> I have one of these on my 3500S and it seems to work OK. https://www.welshent.com/Jaguar-Brake-Master-Cylinder-P24162.aspx
> 
> The only variation I know of on the Rover and Jaguar master cylinders of this type is that the very small piston and associated O-ring seal between the air valve and the hydraulic side is smaller on one of them.  I am not aware of any practical difference in operating function among them.
> 
> I have had trouble with leaks from rebuilt units of this type after a couple years of service, even when they are sleeved in stainless, due to some combination of seal material and maybe wear in a plastic bushing that get reused.
> 
> --Steve Manwell
> 
> 
>> On 1/11/2019 9:54 PM, Jonathan Present via Rovernet wrote:
>> I am in dire need of a Master Cylinder for this vehicle
>> 
>> I hear there are two types, a Jaguar model that will work, and one made specifically for the Rover, I would prefer the latter
>> 
>> Would anyone happen to have a part number, and a business that would sell me one, U.S.A. preferred, but UK works
>> 
>> Is anyone aware of NOS (new old stock) parts available for this car?
>> 
>> Thank You,
>> 
>> JP
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at rovernet.org
>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>> 
> 
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org