[Rovernet] P6 Parts for new owner -- Federal Series II 2000TC

[Ruggeri, Robert]

Series 2 car.


Bob 


-----Original Message-----
From: Rovernet <rovernet-bounces at rovernet.org> On Behalf Of Vern Klukas via Rovernet
Sent: Tuesday, March 12, 2019 4:38 PM
To: Rovernet <rovernet at rovernet.org>
Cc: Vern Klukas <vern at inkspotco.com>
Subject: Re: [Rovernet] P6 Parts for new owner -- Federal Series II 2000TC

The first question is it a series 2 car.

Actually, these day you just buy the shifter lever outright. There is more than that likely going on, but what to replace depends heavily on which style of shifter remote is on the car, series 1 or series 2.

SU carb kits get from Joe Curto

Yours
Vern

> On Mar 12, 2019, at 1:20 PM, Geff McCarthy via Rovernet <rovernet at rovernet.org> wrote:
> 
> You can have the shifter "ball" replaced by purchase from JR Wadhams, he will want yours in exchange.  I sold my car and loads of parts to Jim Legg in Northern CA, including many sets  of brake rebuild kits, pads, car rebuild kits, etc.  Jim might be willing to part with many. His email, jmlegg44 AT yahoo.com. I would recommend Joe Curto in Brooklyn for carb rebuilds, but I think he may have a significant backlog. Good luck!
> 
> Geoffrey W. McCarthy MD MBA DipAvMed
> 677 NW Melinda Ave
> Portland OR 97210
> 503-241-8468 (h)
> 503-799-3809 (m)
> 
> -----Original Message-----
> From: Rovernet <rovernet-bounces at rovernet.org> On Behalf Of Ruggeri, Robert via Rovernet
> Sent: Tuesday, March 12, 2019 12:36
> To: 'Rovernet' <rovernet at rovernet.org>
> Cc: Ruggeri, Robert <Robert.Ruggeri at suny.edu>
> Subject: Re: [Rovernet] P6 Parts for new owner -- Federal Series II 2000TC
> 
> Hi All:
> 
> Mechanic has given me the following list of needed parts.  I'd prefer to support folks here who might be suppliers.
> 1970 Rover 2000TC.  US model.
> 
> Brakes:
>        Rear rotors and pads.
>        Rear Calipers (or re-build kits).
> 
> Two SU carb rebuild kits
> 
> Valve cover gasket
> 
> Plugs, wires, cap, rotor, and points.
> 
> Thermostat.
> 
> The manual gear shifter is very sloppy and hard to find the gears.   Anyone have the bushing or whatever else would need replacing?
> 
> Thanks all.  I'm struggling to get this car road-worthy by the event in Fitchburg…..
> 
> You can reply to me off-line if you prefer to keep the airwaves clear.  Robert.ruggeri at suny.edu<mailto:Robert.ruggeri at suny.edu>
> 
> Bob
> 
> robert e. ruggeri
> 1846 Union Street
> Niskayuna, New York 12309
> Tel:  518.423-9755
> Fax: 518.377-4646
> robert.ruggeri at suny.edu<mailto:robert.ruggeri at suny.edu>
> 
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190312/713b4650/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> 
> 
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

inkspotco.com · 250 864 5619 · in at inkspotco.com




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190312/58f744e6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: E-mail Signature logo.png
Type: image/png
Size: 22660 bytes
Desc: not available
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190312/58f744e6/attachment.png>
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org