[Rovernet] Rebuilding petrol reserve valve

[Vern Inkspot]

Hi Lance

Just 1 as far as I can recall. It’s about a 5 minute job once you have the tap out of the carYour best bet would be to take the valve barrel to your local oring store for sizing. An industrial supply house that does hydraulics would do. It’s about a five minute job once the tap is out of the car.

Yours
Vern




> On Nov 8, 2019, at 6:42 AM, LANCE LA CERTE PSY D via Rovernet <rovernet at rovernet.org> wrote:
> 
> '70 3500S P6B
> 
> A while back someone provided information about buying "Viton" o-rings to rebuild this valve.  I'm about to tackle this but have yet to remove it----how many o-rings are needed as part of the rebuild.
> 
> Thanks in advance for any help
> 
> Lance La Certe, Psy.D.
> 
> 
> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20191108/414eec54/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org


inkspotco.com · 250 864 5619 · in at inkspotco.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20191108/126e499e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: E-mail Signature logo.png
Type: image/png
Size: 22660 bytes
Desc: not available
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20191108/126e499e/attachment.png>