[Rovernet] 3500s servo puzzle

[Glen R Wilson]

On 7/19/20 4:34 PM, geffandjulie--- via Rovernet wrote:
> I had a similar problem that was caused by the small plastic air valve on the front, I think. It should hold a bit of pressure? But was not releasing.
>
> Geoffrey W. McCarthy
EXACTLY what I had, Geoff. I was trying to remember what it was, and 
that was it.
>
>
> MD MBA DipAvMed
> 677 NW Melinda Ave
> Portland OR 97210
> 503-241-8468 (h)
> 503-799-3809 (m)
>
> -----Original Message-----
> From: Rovernet <rovernet-bounces at rovernet.org> On Behalf Of Peter King via Rovernet
> Sent: 19 July 2020 13:30
> To: Rovernet <rovernet at rovernet.org>
> Cc: Peter King <peter at king-co.com>
> Subject: [Rovernet] 3500s servo puzzle
>
>
> Hi all. I’m having trouble sorting out an issue with my 3500s servo. I just rebuilt it with a jaguar kit from Moss Motors. It’s back in, and is causing the brakes to bind up when I start the engine. The master is brand new, all vacuum lines good and properly connected. I’ve had the servo apart twice and after correcting an improperly placed spring in the shaft, am still having trouble with it.
>
> I checked vacuum at the master air valve and that is good. Good vacuum at the canister.
>
> Any other thoughts on What might be causing this?
>
>
> Sent from my iPhone
>
>> On Jul 7, 2020, at 5:52 PM, Dermot Harvey via Rovernet <rovernet at rovernet.org> wrote:
>>
>> Hi Dick.
>>
>> I’m pretty sure I have a rear can for a Rover 2000 in stock. However, I’m away until the end of August. Give me a try then.
>>
>> Dermot Harvey
>> Spectral Kinetics(Retired)
>>
>>> On Jul 7, 2020, at 11:34 AM, Vern Inkspot via Rovernet <rovernet at rovernet.org> wrote:
>>>
>>> This is the business:
>>>
>>> https://www.doublesexhaust.com <https://www.doublesexhaust.com/>
>>>
>>> Yours
>>> Vern
>>>
>>>>> On Jul 7, 2020, at 7:59 AM, geffandjulie--- via Rovernet <rovernet at rovernet.org> wrote:
>>>> There is a company in Vancouver that imports stainless exhausts from UK.
>>>> Sorry I can't remember name. You might write Ruth Burgess, or the
>>>> Rover Car Club of Canada.
>>>>
>>>> Geoffrey W. McCarthy MD MBA DipAvMed
>>>> 677 NW Melinda Ave
>>>> Portland OR 97210
>>>> 503-241-8468 (h)
>>>> 503-799-3809 (m)
>>>>
>>>> -----Original Message-----
>>>> From: Rovernet <rovernet-bounces at rovernet.org> On Behalf Of Steven
>>>> Dibdin via Rovernet
>>>> Sent: 07 July 2020 07:08
>>>> To: Rovernet <rovernet at rovernet.org>
>>>> Cc: Steven Dibdin <sdibdin at gmail.com>
>>>> Subject: Re: [Rovernet] Rear muffler for '69 2000 TC
>>>>
>>>> Hi Dick,
>>>>
>>>> Your best bet would be to talk to a local exhaust specialist that
>>>> makes systems for hot rods. They should be able to weld in a new box
>>>> onto the existing system. Also, I think the P6 system uses
>>>> resonators and not mufflers, hence their rather fruity note.
>>>>
>>>> Best,
>>>>
>>>> Steven
>>>>
>>>> On Tue, Jul 7, 2020 at 9:40 AM Richard Kress via Rovernet <
>>>> rovernet at rovernet.org> wrote:
>>>>
>>>>> Does anyone know of a vendor in the states that may have a muffler
>>>>> for a
>>>>> 69 2000 TC rover? Rear muffler.
>>>>>
>>>>> Dick Kress
>>>>>
>>>>> Sent from my iPhone
>>>>>
>>>>> _______________________________________________
>>>>> Rovernet mailing list
>>>>> Rovernet at rovernet.org
>>>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>>>>>
>>>> -------------- next part -------------- An HTML attachment was
>>>> scrubbed...
>>>> URL:
>>>> <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/202
>>>> 00707/bf
>>>> 06722e/attachment.html>
>>>> _______________________________________________
>>>> Rovernet mailing list
>>>> Rovernet at rovernet.org
>>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>>>>
>>>>
>>>> _______________________________________________
>>>> Rovernet mailing list
>>>> Rovernet at rovernet.org
>>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>>>
>>> inkspotco.com · 250 864 5619 · in at inkspotco.com
>>>
>>> -------------- next part -------------- An HTML attachment was
>>> scrubbed...
>>> URL:
>>> <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/2020
>>> 0707/c507f838/attachment.html>
>>> -------------- next part -------------- A non-text attachment was
>>> scrubbed...
>>> Name: E-mail Signature logo.png
>>> Type: image/png
>>> Size: 22660 bytes
>>> Desc: not available
>>> URL:
>>> <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/2020
>>> 0707/c507f838/attachment.png>
>>> _______________________________________________
>>> Rovernet mailing list
>>> Rovernet at rovernet.org
>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>> -------------- next part -------------- An HTML attachment was
>> scrubbed...
>> URL:
>> <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20200
>> 707/13aca944/attachment.html>
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at rovernet.org
>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org