[Rovernet] clutch slave cylinder

[Steven Dibdin]

I've had very good luck with rebuild kits from Custom Spares Ltd in
Brewster NY. Their website is customsparesltd dot com (rovernet scrubs URLs
for some reason). Always use dot 4 fluid with our cars though, it really
helps with seal life.

Best,

Steven

On Fri, Jul 31, 2020 at 3:33 PM Jose Scoseria via Rovernet <
rovernet at rovernet.org> wrote:

> If you change the diameter you will modify the stroke. Keep the same.
>
> On Fri, Jul 31, 2020, 3:23 PM larry williamson via Rovernet <
> rovernet at rovernet.org> wrote:
>
> > Thanks for the info. I see that Moss has lockeek with 1' diameter and
> 7/8'
> > diameter. Mine is 7/8 and since I am replacing the cylinder would the
> 1inch
> > help or hinder? Thanks for the speedy replies. Larry
> >
> > On Fri, Jul 31, 2020 at 12:20 PM Jose Scoseria via Rovernet <
> > rovernet at rovernet.org> wrote:
> >
> > > Confirming.  A year or so ago , I changed a pitted slave cylinder on my
> > TC
> > > 68 , got it  from a mini parts dealer, if you check moss , the early
> > mini
> > > MC and sprite/midget MC both have the same part no. 180-655.
> > >
> > > On Fri, Jul 31, 2020 at 2:11 PM Jess Rainey via Rovernet <
> > > rovernet at rovernet.org> wrote:
> > >
> > > > Hi Larry,
> > > > The slave cylinder used on the 2000 series P6 had multiple
> > applications.
> > > > The one you quote may work. I had a 1979 Mini 1000 that had the same
> > > slave.
> > > > Hope this helps.
> > > > Regards,
> > > > Jess
> > > >
> > > > Sent from my iPad
> > > >
> > > > > On Jul 31, 2020, at 10:49 AM, larry williamson via Rovernet <
> > > > rovernet at rovernet.org> wrote:
> > > > >
> > > > > Has anyone recently replaced a kit in a 19678 TC? I see that in an
> > old
> > > > > paper that the slave cylinder from a MG midget will work. Moss
> Motors
> > > has
> > > > > this part. Larry
> > > > > -------------- next part --------------
> > > > > An HTML attachment was scrubbed...
> > > > > URL: <
> > > >
> > >
> >
> http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20200731/8fc925e9/attachment.html
> > > > >
> > > > > _______________________________________________
> > > > > Rovernet mailing list
> > > > > Rovernet at rovernet.org
> > > > > http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> > > >
> > > >
> > > > _______________________________________________
> > > > Rovernet mailing list
> > > > Rovernet at rovernet.org
> > > > http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> > > >
> > > -------------- next part --------------
> > > An HTML attachment was scrubbed...
> > > URL: <
> > >
> >
> http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20200731/b29c3243/attachment.html
> > > >
> > > _______________________________________________
> > > Rovernet mailing list
> > > Rovernet at rovernet.org
> > > http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> > >
> > -------------- next part --------------
> > An HTML attachment was scrubbed...
> > URL: <
> >
> http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20200731/584b66b1/attachment.html
> > >
> > _______________________________________________
> > Rovernet mailing list
> > Rovernet at rovernet.org
> > http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20200731/9a8be0df/attachment.html
> >
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20200731/e5e6fed2/attachment.html>