[Rovernet] REQUEST FOR ADVICE
Tom Rymes
tom at rymes.net
Mon Jun 27 20:43:57 EDT 2022
Interesting! Does anyone have photos? Or a diagram from the service parts manual?
> On Jun 27, 2022, at 6:25 PM, Vern Inkspot via Rovernet <rovernet at rovernet.org> wrote:
>
> Girling rears are a little hydraulic piston running in a small bore, so the bore is the sealing surface.
>
> Yours
> Vern
>
>> On Jun 27, 2022, at 3:12 PM, Tom Rymes via Rovernet <rovernet at rovernet.org> wrote:
>>
>> Dermot,
>>
>> Wouldn’t that only be true for Dunlop brakes? In those calipers, the sealing surface is in the cylinder itself, whereas the piston is the sealing surface in Girling calipers?
>>
>> Or is there something I’m missing?
>>
>> Tom
>>
>>> On Jun 27, 2022, at 5:52 PM, Dermot Harvey via Rovernet <rovernet at rovernet.org> wrote:
>>>
>>> I have had problems with White Post also, and I don’t use them anymore. You don’t mention what White Post did to rebuild your caliper. I am assuming that the model of your Rover was a P6 (2000). Usually the hydraulic cylinder in the caliper leaks. If so, the cylinder has to be resleeved, preferably with stainless steel. You need a good machinist to do this.
>>> I used to use a guy in Mass? for rebuilding, but I think he has retired.
>>> Good Luck!
>>>
>>>
>>> Dermot Harvey
>>> Spectral Kinetics
>>>
>>>> On Jun 27, 2022, at 3:52 PM, Tom Rymes via Rovernet <rovernet at rovernet.org> wrote:
>>>>
>>>> It would help if you can specify where it is leaking from.
>>>>
>>>>>> On Jun 27, 2022, at 3:30 PM, Jonathan Present via Rovernet <rovernet at rovernet.org> wrote:
>>>>>
>>>>> Hello Roverites,
>>>>> I send my rear brake caliper to White Post Restorations last year for a rebuild, it was installed and started to fail. I subsequently had it removed, sent back to them, and had it reinstalled, they maintained it was tested, however, it continues to leak. At this juncture I am a loss of how to proceed. I can send it back to them, with little confidence that it will continue to operate. I can try and locate another shop… Any advice is much appreciated. The cost of both installations was considerable. I am at an age where do it yourself is no longer feasible, without proper tools and a workspace.
>>>>> _______________________________________________
>>>>> Rovernet mailing list
>>>>> Rovernet at rovernet.org
>>>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>>>>
>>>> _______________________________________________
>>>> Rovernet mailing list
>>>> Rovernet at rovernet.org
>>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>>>
>>>
>>> _______________________________________________
>>> Rovernet mailing list
>>> Rovernet at rovernet.org
>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>>
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at rovernet.org
>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
>
> inkspotco.com · 250 864 5619 · in at inkspotco.com
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20220627/c36ff279/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: E-mail Signature logo.png
Type: image/png
Size: 22660 bytes
Desc: not available
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20220627/c36ff279/attachment.png>
More information about the Rovernet
mailing list