[Rovernet] Brake Caliper issue
Roger Matheson Bigpond Account
roger.matheson at bigpond.com
Wed Nov 16 22:02:15 EST 2022
Hello all
A way to check the operation of the pushrod and its actuating ratchet is
to disconnect the handbrake connection from this caliper and operate
this lever through its complete movement with a suitable spanner. You
should be able to hear a clicking sound as the ratchet slides back over
the teeth of the push rod. Repeated cycles of this movement will push
the brake pads fully onto the disk. You will then be able to bleed the
left caliper reliably. With that done the handbrake should work
correctly. If there is no sound or the pads do not progress then there
is a fault in the reassembly or either the ratchet or push rod are worn.
Hope this helps
Cheers Roger
------ Original Message ------
From: "Janet Scruggs via Rovernet" <rovernet at rovernet.org>
To: "rovernet at rovernet.org" <rovernet at rovernet.org>
Cc: "Janet Scruggs" <gjkzscruggs at verizon.net>
Sent: Thursday, 17 Nov, 2022 At 1:39 PM
Subject: Re: [Rovernet] Brake Caliper issue
I think you are referring to the shop called White Post. Right?
-----Original Message-----
From: pierre janusz via Rovernet <rovernet at rovernet.org>
To: rovernet at rovernet.org <rovernet at rovernet.org>
Cc: pierre janusz <pjemail at aol.com>
Sent: Wed, Nov 16, 2022 1:33 pm
Subject: Re: [Rovernet] Brake Caliper issue
I would have thought that any competent re-builder of a caliper would
have noticed any worn cog wheel (or pushrod as it is correctly called in
Rover nomenclature) and replaced it.
This may show that White Plain are not competent.
-----Original Message-----
From: geffandjulie--- via Rovernet <rovernet at rovernet.org>
To: 'Rovernet' <rovernet at rovernet.org>
CC: geffandjulie at comcast.net
Sent: Wed, 16 Nov 2022 18:24
Subject: Re: [Rovernet] Brake Caliper issue
Dermot Harvey is expert in the rear brakes, He found the error in the
one I rebuilt: worn cog wheel.
Geff and Julie McCarthy
677 NW Melinda Ave
Portland OR 97210
503-241-8468 (h)
503-799-3809 (m)
From: Rovernet <rovernet-bounces at rovernet.org> On Behalf Of Vern Inkspot
via Rovernet
Sent: 16 November 2022 09:50
To: Rovernet <rovernet at rovernet.org>
Cc: Vern Inkspot <vern at inkspotco.com>
Subject: Re: [Rovernet] Brake Caliper issue
What do you mean when you say it doesn’t engage?
Yours
Vern
On Nov 16, 2022, at 9:23 AM, Jonathan Present via Rovernet
<rovernet at rovernet.org <mailto:rovernet at rovernet.org> > wrote:
I had my left rear Caliper rebuilt three times by White Pine in
Virginia. It still does not engage. Any suggestions? I am also seeing a
replacement caliper that hopefully does not require rebuilding
Sent from my iPhone
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org <mailto:Rovernet at rovernet.org>
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
<http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
inkspotco.com <http://inkspotco.com/> · 250 864 5619 · in at inkspotco.com
<mailto:in at inkspotco.com>
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org <mailto:Rovernet at rovernet.org>
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
<http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org <mailto:Rovernet at rovernet.org>
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
<http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
<http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20221117/d774aa56/attachment-0001.html>
More information about the Rovernet
mailing list