[Rovernet] Front brake problem 1970 Rover 3500S

[Janet Scruggs]

 My '70 3500S had a sticking front brake issue that turned out to be a sticking master cylinder.  A few taps on the MC would release the pressure until they had to be applied again.  Replaced the MC and problem went away.  


    On Monday, July 17, 2023 at 09:56:24 AM EDT, Ben Saunders via Rovernet <rovernet at rovernet.org> wrote:  
 
 Check all the vacuum lines since they are prone to leak and there is a 
return valve in the master cylinder that may be sticking.

On 7/17/23 2:44 AM, Jonathan Present via Rovernet wrote:
> Friends,
> My front brakes are locking up after hard braking and regular use.
> Have any of you experienced this issue, if so, what were the specific issues?
>
> Sent from my iPhone
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20230717/ae8c753c/attachment.html>