<div dir="ltr"><div dir="ltr">Hi Nelson,<div><br></div><div>Hope you're doing well.</div><div><br></div><div>I've converted both my SD1's to the series 2 units (master cylinder and servo have to be switched out in tandem, can't be combined with series 1 items). I have a couple of series 1 servos that may still be functional and if we were on the same coast, you'd be welcome to them -- but shipping costs for heavy items makes that a less attractive option.  In general, I believe the TR7's servo was smaller and am not sure about the TR8's compatibility (but Rimmers doesn't stock those, either).  As for TR8 master cylinders, the brake lines are on the opposite side from the SD1's -- although I've seen one installed on an series 1 SD1's servo with lines wrapped around the m/c to accommodate it (a rather desperate measure reflecting a lack of available spares at the time).</div><div><br></div><div>It would have been nice if Leyland had made more effort to share components across model lines, but they clearly weren't very good at doing such things.</div><div><br></div><div>If you switch to the series 2 combo, you'll need to modify one of the brake lines (Girling unhelpfully used a different size outlet in a move that made it more complicated to retrofit older SD1's with these newer units and, no, Rimmers doesn't supply an adapter).  There's someone you know in SoCal who had a red SD1 that I'd installed a 2nd series m/c and servo on -- before he left it out in the desert on a neighbor's lot where it was soon vandalized.  Maybe you can rescue those units if it hasn't been scrapped?  Other than that one brake line, they're direct fit replacements (but a tight fit, the servo's a slightly larger diameter) and have generally been more durable/serviceable/effective in braking these cars than were the earlier units.  There was also no provision made for rebuilding series 1 servos that I recall, so sooner or later the only choice seems to be replacing both items.  You can indeed rebuild the series 1 (Lockheed) master cylinders, but without a functioning servo you're still out of luck<span style="line-height:1.5">.  [Most of them were ruined by leaks from those old m/c's, anyway!]</span></div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Dec 5, 2020 at 9:31 PM Rover Man via Rovernet <<a href="mailto:rovernet@rovernet.org" target="_blank">rovernet@rovernet.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-color:rgb(204,204,204);border-left-style:solid;padding-left:1ex"><div><div style="font-family:'Helvetica Neue',Helvetica,Arial,sans-serif;font-size:13px"><div dir="ltr">Hello everyone on RoverNet,</div><div dir="ltr"><br></div><div dir="ltr">I have a good question to ask as i am still new on the Rover SD1's. What i have now is a 1980 Rover SD1 3500. The Question is the compatibility on parts from the TR's TR7 &TR8 if so. I am looking at Rimmers site show the TR8 servo-master combo upgrades yet out of stock using a modified Rover part  using the Triumph listings. So i click onto the TR7's servos, it appears visually the same part as the SD1's. Will they fit the SD1's? I am not looking to fit a series 2 SD1 system just yet. <br></div><div dir="ltr">Any help on the issue on this subject i appreciate it, thanks</div><div dir="ltr">From Nelson O'Riley</div><div dir="ltr">Roverman</div><div dir="ltr">p4</div><div dir="ltr">p5</div><div dir="ltr">p6</div><div dir="ltr">SD1</div><div dir="ltr"><br></div><div dir="ltr"><br></div><div dir="ltr"><br></div></div></div>_______________________________________________<br>
Rovernet mailing list<br>
<a href="mailto:Rovernet@rovernet.org" target="_blank">Rovernet@rovernet.org</a><br>
<a href="http://rovernet.org/mailman/listinfo/rovernet_rovernet.org" rel="noreferrer" target="_blank">http://rovernet.org/mailman/listinfo/rovernet_rovernet.org</a><br>
</blockquote></div>