[Rovernet] Rare bits wanted
louatlcf at aol.com
louatlcf at aol.com
Sun Mar 16 19:58:18 EDT 2014
Hi
I have a 1966 Rover 2000TC equipped with Dunlop brakes and a single 7 inch servo one of the first imported and I have Rostyle wheels. See attached Pics. I didn't think there were an earlier version, if so must be rarer than my car.
Lou
-----Original Message-----
From: scott kohl <sdkgt6 at yahoo.com>
To: Rovernet <rovernet at rovernet.org>
Sent: Sun, Mar 16, 2014 12:25 pm
Subject: Re: [Rovernet] Rare bits wanted
The story I have, that I have seen recounted on sites from both sides of the
Atlantic, is that when the TC came out in late '65, Rover wanted to offer a
sporty wheel option for the US cars, but Rostyle did not have a wheel with the 5
on 5 pattern, so they made a deal with Magnum in the US to use their wheels.
The pattern closest to 5 on 5 was the GM 5 on 4.75, so when a US TC was ordered
with Magnums, the front and rear hubs were machined just for each car. This
changed sometime during 1967 when 5 on 5 Rostyles came on line, it appears no
one knows exactly when. Your '67 will have 5 on 5 hubs. I have read posts on
the Classic Rover Forum from a gentleman in CA who hads an early TC with the
Magnums. He also has a set of Magstars, and has stated that he has to swap the
hubs to make the wheel change, and he was going to have to make a decision about
which to use permanently because he was tired of doing so much work. That is
what makes these hubs so
damn hard to find, they were on less that a years' worth of cars, and only cars
ordered with Magnums. There is a thread on the Rover site comparing pictures of
Magnums and Rostyles in Rover's own sales brochures, and you can see the gap
between the wheelnut and center is different. At least one of the Magnum fitted
cars was re-imported to the UK, the chap who brought it in attested to the
difference. He said his finger didn't fit inside the nut on the Magnum, it did
easily with the Rostyle. If you're curious I can look up and cite the web
addresses to the pages discussing this issue.
Scott
Ah... Scott... they're all the same hubs. On my '67 2000TC, that came with
Magstar wheels, I've run Rostyles and SD1 wheels. Having owned this car, and
several others, for just short of 44 years I've never seen a different spec hub
or wheel. Have another look.
--------------------------------------------
On Sun, 3/16/14, gjkzscruggs at verizon.net <gjkzscruggs at verizon.net> wrote:
Subject: Re: [Rovernet] Rare bits wanted
To: rovernet at rovernet.org
Date: Sunday, March 16, 2014, 10:26 AM
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20140316/5ff6314e/attachment.html>
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20140316/5af611f6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1123.JPG
Type: image/jpeg
Size: 1741722 bytes
Desc: not available
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20140316/5af611f6/attachment.JPG>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_1126.JPG
Type: image/jpeg
Size: 1619815 bytes
Desc: not available
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20140316/5af611f6/attachment-0001.JPG>
More information about the Rovernet
mailing list