[Rovernet] 1969 P6 2000TC

Vern Klukas vern at inkspotco.com
Sat Apr 21 00:34:25 EDT 2018


The gearboxes are not identical, or rather the clutch release assembly in the bellhousing differs early to late. That was a change to accommodate a different clutch pressure plate total thickness. What is the engine number? Assuming the gearbox is original, that will tell which of the three you need.

Yours
Vern

> On Apr 20, 2018, at 8:36 PM, TrinLando08 via Rovernet <rovernet at rovernet.org> wrote:
> 
> Thanks Gianni. So I guess it comes out before ordering then. Now you did
> say "pull the engine" is that the best way to do the job or can I remove
> box alone? I have access to a proper lift but can't leave the car on it for
> more than a day at a time.
> 
> On Fri, Apr 20, 2018 at 10:52 PM, Gianni D'Ortenzio via Rovernet <
> rovernet at rovernet.org> wrote:
> 
>> When I replaced the clutch in my TC last year, the local supplier asked to
>> bring it in because there were three different types in his catalogue.
>> 
>> With the several gearboxes I have in my spares supplies, there are indeed
>> three different types, but same gearbox basically, so am not sure what
>> difference if any it would make if one used the “wrong one".
>> 
>> Still being the good boy that I am, I did as I was told, and all went well.
>> 
>> Mind you it was not a quick changeover, and found lots of other little
>> jobs to do whilst engine was out, so took me some months!
>> Made sense to replace side plates et al, even though they were just fine
>> when I took them out.
>> 
>> Blinging the side plates and engine pipe seemed good idea until I replaced
>> everything and you could’t really see the bling!
>> Still I know it is there and isn’t that all that matters?
>> 
>> Cheers Gianni
>> 1948 P3 6 Light
>> 1961 Landrover Series II
>> 1968 2000 TC
>> 1974 Lotus Elite 501
>> 
>> On 21 Apr 2018, at 11:08 am, TrinLando08 via Rovernet <
>> rovernet at rovernet.org> wrote:
>> 
>>> Hello Gentlemen. I'm in need of a complete clutch kit for my 69 2000TC.
>>> I've tried online sites and they want me to pull apart and take pictures
>>> before ordering. I live in Florida USA and I can't have the car immobile
>>> and slung up for that much time. Is it that difficult to obtain a
>> complete
>>> clutch pack?
>>> 
>>> Warmest regards
>>> Sean Farnum
>>> -------------- next part --------------
>>> An HTML attachment was scrubbed...
>>> URL: <http://rovernet.org/pipermail/rovernet_rovernet.
>> org/attachments/20180420/be6cfef1/attachment.html>
>>> _______________________________________________
>>> Rovernet mailing list
>>> Rovernet at rovernet.org
>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>> 
>> 
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at rovernet.org
>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>> 
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20180420/5ece1828/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

inkspotco.com · 250 864 5619 · in at inkspotco.com




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20180420/13d49b46/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: E-mail Signature logo.png
Type: image/png
Size: 22660 bytes
Desc: not available
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20180420/13d49b46/attachment.png>


More information about the Rovernet mailing list