[Rovernet] servo rod "stuck"?

Peter King peter at king-co.com
Thu Jun 20 22:06:39 EDT 2019


If it’s like the master, it might just be the rubber O-ring sticking. mine got stuck and I got it out by clamping the piston in between 2 pieces of wood and pulling on the body. You removed the retaining clip?

Sent from my iPhone

> On Jun 20, 2019, at 8:10 PM, Jim Pile via Rovernet <rovernet at rovernet.org> wrote:
> 
> In dismantling the servo in the 3500S, I came to an abrupt stop when the servo rod, which is supposed to be drawn out "gently," seems to be hindered by something: It only allows me to pull it out about 1/2 inch, then refuses to budge as if something is physically stopping it.  What am I missing?
>     Thanks for any advice.
>         Jim Pile
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190621/5fb2ff05/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org




More information about the Rovernet mailing list