[Rovernet] pjemail at aol.com

[Peter King]

I’ve also used rubber from a tire on both sides to grip smooth surfaces I don’t want damaged in the vise. Good luck!

Sent from my iPhone

> On Jun 21, 2019, at 8:57 AM, Jim Pile via Rovernet <rovernet at rovernet.org> wrote:
> 
> Thanks. I'll try it.
> 
> 
> -----Original Message-----
> From: pierre janusz via Rovernet <rovernet at rovernet.org>
> To: rovernet <rovernet at rovernet.org>
> Cc: pierre janusz <pjemail at aol.com>
> Sent: Fri, Jun 21, 2019 7:57 am
> Subject: Re: [Rovernet] servo rod "stuck"?
> 
> I think it is just a question of applying enough force. You can try re-attaching the large plastic piston (using the locking key) and getting better leverage with this.
> Pierre
> 
> 
> -----Original Message-----
> From: Jim Pile via Rovernet <rovernet at rovernet.org>
> To: rovernet <rovernet at rovernet.org>
> CC: Jim Pile <jpile1 at verizon.net>
> Sent: Fri, Jun 21, 2019 01:11 AM
> Subject: [Rovernet] servo rod "stuck"?
> 
> 
> In dismantling the servo in the 3500S, I came to an abrupt stop when the servo rod, which is supposed to be drawn out "gently," seems to be hindered by something: It only allows me to pull it out about 1/2 inch, then refuses to budge as if something is physically stopping it.  What am I missing?
>     Thanks for any advice.
>         Jim Pile
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190621/5fb2ff05/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190621/28825ed9/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20190621/aaf6fe87/attachment.html>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org