[Rovernet] Binding P6 Half Shaft

[Alan Francis]

Hi Lance

Thanks for your prompt reply, yes I'm sure this was the thread, I remember
having to look up what a "Zerk" was!

I will check out the position of it and see if that might be the cause of
the issue.

Best Regards

Alan

On Tue, Mar 1, 2022 at 4:08 PM Lance La Certe via Rovernet <
rovernet at rovernet.org> wrote:

> Hi Alan,
>
> I'm hoping it was my thread and that it pertains to your problem.  After
> replacing the UJs I discovered that I had refitted one of them backwards,
> such that the protruding zerk was interfering with the rotation.  Once I
> re-removed the half-shaft (clearly an unanticipated pain) , and
> re-installed the UJ with the zerk pointing in the opposite direction, the
> binding was no longer possible.
>
> Hope that helps,  Lance
>
>
>
>
>
>
>
> ------------------------------
> *From:* Rovernet <rovernet-bounces at rovernet.org> on behalf of Alan
> Francis via Rovernet <rovernet at rovernet.org>
> *Sent:* Tuesday, March 1, 2022 3:12 AM
> *To:* Rovernet <rovernet at rovernet.org>
> *Cc:* Alan Francis <partviking1 at gmail.com>
> *Subject:* [Rovernet] Binding P6 Half Shaft
>
> A while back there was a  thread on Rovernet about P6 half shafts binding
> or failing to turn 360 deg after new UJ's had been fitted. I am now
> experiencing a similar problem as shown in the video link below which
> hopefully Rovernet will allow. I have tried searching the archive but I'm
> unable to find the thread. Can anyone advise me what the problem was and
> how to resolve it. I seem to remember the UJ's had to be turned through 180
> deg.
> Any advice appreciated.
>
>
> https://drive.google.com/file/d/10zq18bRNAYq9EjwA0H5Q7bYQX5nqBLqS/view?usp=sharing
>
>
> Regards
>
> Alan
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20220302/ce9c9296/attachment.html>