[Rovernet] Is this jacked-up???

[Michael Pellow]

The one shown on ebay is for an SD1 it mounts on square slots directly 
under the rear bumper at corners end by the mounts and in front ,about a 
foot in from from the edge  they are very scary as the car is quite 
unstable unless it  is on a  dead flat surface. the other wheels need to 
be securely chocked .
once my other rear wheel slipped sideways and the jack twisted letting 
the car drop

On 29/09/2022 11:04 am, Lance La Certe via Rovernet wrote:
> Yup, exactly what I thought
> 
> 
> 
> ------------------------------------------------------------------------
> *From:* Rovernet <rovernet-bounces at rovernet.org> on behalf of Vern 
> Inkspot via Rovernet <rovernet at rovernet.org>
> *Sent:* Wednesday, September 28, 2022 4:02 PM
> *To:* Rovernet <rovernet at rovernet.org>
> *Cc:* Vern Inkspot <vern at inkspotco.com>
> *Subject:* Re: [Rovernet] Is this jacked-up???
> It’s not a P6 jack. It does look a lot like a SD1 jack.
> 
> Yours
> Vern
> 
>> On Sep 28, 2022, at 3:00 PM, Peter King via Rovernet 
>> <rovernet at rovernet.org <mailto:rovernet at rovernet.org>> wrote:
>>
>> Hi Lance,
>>
>> I can’t confirm if Rover changed the jack at some point, but this is 
>> mine from 1964, round lifting arm, quite different crank with wooden 
>> handle.
>>
>> Peter
>>
>> <0591D3F5-7B88-40DC-B5FC-A7A25359A6BD.jpeg><7872EC96-186D-43F8-9669-0D55A108E663.jpeg><AC0F2EC4-A1C5-4E7D-9837-429E52936772.jpeg>
>> <pkco_k.png>
>>
>>
>> Peter King + Company
>> 10 Derby Square
>> Suite N2
>> Salem, MA 01970
>> Office: 617-292-7877 x302
>> Mobile: 617-943-3018
>> https://www.king-co.com <https://www.king-co.com/>
>>
>>> On Sep 28, 2022, at 5:48 PM, Lance La Certe via Rovernet 
>>> <rovernet at rovernet.org <mailto:rovernet at rovernet.org>> wrote:
>>>
>>> Would appreciate some confirmation.  I've never seen a P6 jack like 
>>> this and wonder if this was indeed a real, OEM unit.  The reason I'm 
>>> asking is that the lifting 'arm' is rectangular and I've never seen a 
>>> P6 with anything but circular jacking holes (especially because the 
>>> rubber bungs in the rocker panel are also round).
>>>
>>> Any thoughts????
>>>
>>> https://www.ebay.com/itm/325272114140?hash=item4bbbba93dc:g:GQAAAOSwBQti0xva&amdata=enc%3AAQAHAAAAoG%2FV%2FFoFet9Qrfmo5HWT0oBPMoPag4pz%2FLx5WX%2BgmLv7bFTbRQ3wZJyJ2o%2Foax%2BRC3Bbl0NGVhxvNHp5CZSjgtq0FjFmjH4Tuz5GcsmtApaNEqAOisFbquzlMhScCJ3E5HxID8ntYRCsJrW23q8PwILTWU5%2Bti%2FWMdjufOLjyljHFoeCsWfhJQnDw3JN27g8NY6mQePWf5svdPyApu8aqhA%3D%7Ctkp%3ABk9SR6D2ksrwYA <https://www.ebay.com/itm/325272114140?hash=item4bbbba93dc:g:GQAAAOSwBQti0xva&amdata=enc%3AAQAHAAAAoG%2FV%2FFoFet9Qrfmo5HWT0oBPMoPag4pz%2FLx5WX%2BgmLv7bFTbRQ3wZJyJ2o%2Foax%2BRC3Bbl0NGVhxvNHp5CZSjgtq0FjFmjH4Tuz5GcsmtApaNEqAOisFbquzlMhScCJ3E5HxID8ntYRCsJrW23q8PwILTWU5%2Bti%2FWMdjufOLjyljHFoeCsWfhJQnDw3JN27g8NY6mQePWf5svdPyApu8aqhA%3D%7Ctkp%3ABk9SR6D2ksrwYA>
>>>
>>>
>>> Lance
>>>
>>> _______________________________________________
>>> Rovernet mailing list
>>> Rovernet at rovernet.org <mailto:Rovernet at rovernet.org>
>>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org 
>>> <http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
>>
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at rovernet.org <mailto:Rovernet at rovernet.org>
>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
> 
> 
> inkspotco.com <http://inkspotco.com> · 250 864 5619 · in at inkspotco.com 
> <mailto:in at inkspotco.com>
> 
> 
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org