[Rovernet] I've got a crush on you

[Lance La Certe]

Hi Bill, thanks for this information.   I must be missing something, so please excuse my confusion.  If the OD of the threaded section of the plug is 0.82, then how can the old washer with an ID of 0.817 fit over the plug  (i.e., 0.817 is a smaller diameter than 0.82).

thanks,  Lance






________________________________
From: Rovernet <rovernet-bounces at rovernet.org> on behalf of magnet--- via Rovernet <rovernet at rovernet.org>
Sent: Sunday, November 5, 2023 10:16 AM
To: Lance La Certe via Rovernet <rovernet at rovernet.org>
Cc: magnet at ican.net <magnet at ican.net>
Subject: Re: [Rovernet] I've got a crush on you


Hi Lance,


As it happens I just put a new washer on mine, whilst changing the oil.


Old washer: ID=0.817 in


Threaded section of plug: OD= 0.82 in


Cheers,


 -- Bill Daddis


=====================



On 04-Nov-2023 6:12 p.m., Lance La Certe via Rovernet wrote:
'70 3500S NADA

Would appreciate it if someone could give me the correct size crush washer for the oil plug.

Thanks,  Lance








_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org<mailto:Rovernet at rovernet.org>
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20231106/5f94a03b/attachment.html>