[Rovernet] I've got a crush on you

magnet at ican.net magnet at ican.net
Mon Nov 6 06:59:06 EST 2023


It's a reasonable question.  What happens is that the gasket engages the 
thread, and thus one side of the gasket sits in the bottom of the V of 
the thread.  Then it just screws on till it gets to the bottom of the 
threaded section of the plug.


Cheers,


  -- Bill



On 05-Nov-2023 10:56 p.m., Lance La Certe via Rovernet wrote:
> Hi Bill, thanks for this information.   I must be missing something, 
> so please excuse my confusion.  If the OD of the threaded section of 
> the plug is 0.82, then how can the old washer with an ID of 0.817 fit 
> over the plug  (i.e., 0.817 is a smaller diameter than 0.82).
>
> thanks,  Lance
>
>
>
>
>
>
> ------------------------------------------------------------------------
> *From:* Rovernet <rovernet-bounces at rovernet.org> on behalf of 
> magnet--- via Rovernet <rovernet at rovernet.org>
> *Sent:* Sunday, November 5, 2023 10:16 AM
> *To:* Lance La Certe via Rovernet <rovernet at rovernet.org>
> *Cc:* magnet at ican.net <magnet at ican.net>
> *Subject:* Re: [Rovernet] I've got a crush on you
>
> Hi Lance,
>
>
> As it happens I just put a new washer on mine, whilst changing the oil.
>
>
> Old washer: ID=0.817 in
>
>
> Threaded section of plug: OD= 0.82 in
>
>
> Cheers,
>
>
>  -- Bill Daddis
>
>
> =====================
>
>
>
> On 04-Nov-2023 6:12 p.m., Lance La Certe via Rovernet wrote:
>> '70 3500S NADA
>>
>> Would appreciate it if someone could give me the correct size crush 
>> washer for the oil plug.
>>
>> Thanks,  Lance
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at rovernet.org  <mailto:Rovernet at rovernet.org>
>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org  <http://rovernet.org/mailman/listinfo/rovernet_rovernet.org>
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20231106/ddb6fa5a/attachment.html>


More information about the Rovernet mailing list