[Rovernet] Vibrations galore---redux

[Steven Dibdin]

Thanks for the update, always good to find out what the problem was. Especially when it’s as scary as that. Not only do those bolts transmit power and braking forces, they also transmit cornering loads to the differential and its mounts! 


Sent from a small screen, please excuse any typos. 

> On Jun 19, 2024, at 21:48, Lance La Certe via Rovernet <rovernet at rovernet.org> wrote:
> 
> 
> First, many thanks to all who provided very helpful diagnostic ideas regarding my vibration problems, initial suspect being an unbalance drive shaft. 
> 
> Checked all the drivetrain mounts; rock solid.    Driveshaft also completely stable.    No movement/slop in any of the universals joints,
> 
> BUT as I'm working my way back from the transmission to the drive shaft to the rear differential---VOILA,  two of the 4 bolts holding the left half- shaft and inboard disc to the differential are gone!!!!!!!     The half-shaft is hanging by the remaining two bolts which were on their way out as well!!!!
> 
> The moral of this little escape for me is, as usual: The more I know, the more I know what I don't know.  
> 
> Hopefully this will be helpful information to others........
> 
> 
> 
> Lance 
> 
> Pastafarian
> AKA, Hoof Hearted
> 
> First Law of Debate:  Never argue with a fool --- people might not know the difference.
> 
> 
> 
> 
> 
> 
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20240619/ea669dc8/attachment.htm>