[Rovernet] 1970 Rover 3500S

[Vern Inkspot]

Internally there is just a little “tappet”, about 3/16 dia and maybe a 1/2 inch long, with a cone on one end. There is a round spring & a retainer screw for the handbrake lever that inserts into the caliper.

Did you send these to White Post in bits or assembled? Did you remove the handbrake lever while removing them from the car? The tappet usually falls out if you do that.

Yours
Vern

> On Nov 11, 2024, at 6:48 PM, Jonathan Present via Rovernet <rovernet at rovernet.org> wrote:
> 
> I sent a pair of calipers to White Post for rebuilding. They contacted me and stated that the parts that go between the caliper and the handbrake are missing, would you know what they might be?
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org


inkspotco.com · 250 864 5619 · in at inkspotco.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20241111/639705f9/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: E-mail Signature logo.png
Type: image/png
Size: 22660 bytes
Desc: not available
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20241111/639705f9/attachment.png>