[Rovernet] Rear Brake issue 1970 3500S P6

[pierre janusz]

 If the brakes have been bled then it would seem that fluid is getting through the flexible hoses, but if you say that fluid is not getting to the rear brakes they cannot have been bled properly. Have you overhauled the calipers? They could be seized.
    On Friday, 17 April 2026 at 03:01:52 BST, Michael Pellow via Rovernet <rovernet at rovernet.org> wrote:   

 had a similar problem. Cause was the flexible brake hoses .They looked 
all right But the inside had collapsed not allowing brake fluid in and 
once in wouldn't release keeping the brakes on



On 17/04/2026 1:15 pm, Jonathan Present via Rovernet wrote:
> Cannot figure out why rear brakes are not functioning, can anyone 
> diagnose what it might be?
> Replaced the brake booster, master cylinder, bled the system multiple 
> times. Front brakes are solid . Rear brakes not getting fluid to. 
> Proportion valve is working.
> 
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20260417/5fb31a8e/attachment.htm>