[Rovernet] Diff/drive shaft o-ring question

[Steven Dibdin]

The retainer does have a habit of getting away from you so hopefully you can find it. 

I might have a spare of you have no luck. 

Best,

Steven 

Sent from a small screen, please excuse any typos. 

> On Jan 27, 2026, at 11:28, FRANK SOMMERS via Rovernet <rovernet at rovernet.org> wrote:
> 
> Hi there, I am in the process of doing the rear brakes on my 67 2000TC. While putting things back together, I replaced the o-ring on the retainer on the passenger side. When I went to do it on the driver side, no retainer or o-ring. Either I set it somewhere and immediately forgot, it dropped off and rolled away, or it was never there.
> 
> Has anyone experienced this before? The manual says to replace the o-ring when equipped but is having an o-ring on one side and not the other a thing? Can I put it back together without it?
> 
> Thanks for any help
> 
> Frank
> Kingston, WA USA
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org