[Rovernet] Diff/drive shaft o-ring question

[FRANK SOMMERS Owner]

Thanks Steven, I may have to take you up on that. I have been asking around at a few parts places and not even gotten a response. I will keep searching.


Thanks
Frank



On Tue, 27 Jan, 2026 at 9:16 AM, Steven Dibdin via Rovernet <rovernet at rovernet.org> wrote:

To: rovernet at rovernet.org
Cc: sdibdin at gmail.com
The retainer does have a habit of getting away from you so hopefully you can find it. 

I might have a spare of you have no luck. 

Best,

Steven 

Sent from a small screen, please excuse any typos. 

> On Jan 27, 2026, at 11:28, FRANK SOMMERS via Rovernet <rovernet at rovernet.org<mailto:rovernet at rovernet.org>> wrote:
> 
> Hi there, I am in the process of doing the rear brakes on my 67 2000TC. While putting things back together, I replaced the o-ring on the retainer on the passenger side. When I went to do it on the driver side, no retainer or o-ring. Either I set it somewhere and immediately forgot, it dropped off and rolled away, or it was never there.
> 
> Has anyone experienced this before? The manual says to replace the o-ring when equipped but is having an o-ring on one side and not the other a thing? Can I put it back together without it?
> 
> Thanks for any help
> 
> Frank
> Kingston, WA USA
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org<mailto:Rovernet at rovernet.org>
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

_______________________________________________
Rovernet mailing list
Rovernet at rovernet.org<mailto:Rovernet at rovernet.org>
http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20260128/d7aed4ee/attachment.htm>