[Rovernet] P5 parts needed

[Ben Saunders]

The Disco and Range Rover both had 3.45 ratio differentials so either 
should work but as for the axle  shafts you may want to have them 
shipped new from the UK then you know you have a good fit.

On 2/22/23 8:27 AM, David Maxwell via Rovernet wrote:

>
> I'm looking for a P5 Mk III or P5b differential (3.54/1 ratio) or one 
> from a Range Rover Discovery (I think that is the model with the same 
> gear ratio that will bolt straight into a P5) along with the drivers 
> side (left side on our side of the pond) axle shaft (the short one).  
> The shaft, over time, moved to the outside on the bearing to the point 
> where the splines no longer mesh with the differential!  When I look 
> at the shaft, the splines look very worn do not seem to engage with 
> the differential and the differential now has many small pieces of 
> metal floating around. Do to the weight of the differential, I'm 
> hoping to fine them in California, Arizona, Nevada, or Oregon so I can 
> drive there and pick them up. Thank you for your help!
>
> David Maxwell
> Tehachapi, CA
>
>
>
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org