[Rovernet] P5 parts needed

[dmaxwell at as.net]

Thanks Ben, that does seem to be the best way to go.

David


On Wednesday 02/22/2023 at 08:17, Ben Saunders via Rovernet  wrote:
> The Disco and Range Rover both had 3.45 ratio differentials so either
> should work but as for the axle  shafts you may want to have them
> shipped new from the UK then you know you have a good fit.
>
> On 2/22/23 8:27 AM, David Maxwell via Rovernet wrote:
>
>>
>>
>> I'm looking for a P5 Mk III or P5b differential (3.54/1 ratio) or one
>> from a Range Rover Discovery (I think that is the model with the same
>> gear ratio that will bolt straight into a P5) along with the drivers
>> side (left side on our side of the pond) axle shaft (the short one).
>> The shaft, over time, moved to the outside on the bearing to the point
>> where the splines no longer mesh with the differential!  When I look
>> at the shaft, the splines look very worn do not seem to engage with
>> the differential and the differential now has many small pieces of
>> metal floating around. Do to the weight of the differential, I'm
>> hoping to fine them in California, Arizona, Nevada, or Oregon so I can
>> drive there and pick them up. Thank you for your help!
>>
>> David Maxwell
>> Tehachapi, CA
>>
>>
>>
>>
>> _______________________________________________
>> Rovernet mailing list
>> Rovernet at rovernet.org
>> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org
>
> _______________________________________________
> Rovernet mailing list
> Rovernet at rovernet.org
> http://rovernet.org/mailman/listinfo/rovernet_rovernet.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://rovernet.org/pipermail/rovernet_rovernet.org/attachments/20230227/d0eb5793/attachment.html>